洛阳附近有没有服务

 Hoist manufacturer

Hand machine: 13462251112 (wechat)

Email: [email?protected]

Address: Weibin Industrial Park, Xinxiang City

Current location: home page > News and information News and information

Small skill of extracting material from hopper by bucket elevator

Source: admin release date: July 23, 2020

? ? ? ? Bucket elevator There are three ways to discharge materials from the hopper: centrifugal, gravity and mixed. Which discharge mode belongs to depends on the rotation speed, radius of driving roller (sprocket) and the size of hopper. In order to understand the relationship between them, the material stress in the hopper is analyzed first. The loading and unloading of bucket elevator provided by the elevator manufacturer has a great influence on its working condition and productivity. The requirements for loading and unloading are as follows: the loading is uniform, and the discharge volume meets the needs of productivity; when the hopper is wound to the driving roller (sprocket), the material can enter the discharge groove correctly, without spilling back to the loaded branch or falling into the unloaded branch; in the process of material dumping, most of the materials are not When using deep or shallow hopper, the material will not collide with the hopper in front during unloading. Attention should be paid to the acceptance and commissioning of these hoists. ?

 The skill of extracting material from hopper by bucket elevator

The manufacturer of bucket elevator suggests that users should know what discharge mode it belongs to, determine the rotation speed of driving roller (sprocket), and the radius of hopper. In order to further understand the situation, the bucket elevator manufacturer suggests to determine the relationship between the materials before hopper analysis. The loading and unloading operation of bucket elevator has great influence on productivity. ?
Bucket elevator is used for loading, unloading requirements are: uniform loading, unloading amount, to meet the needs of productivity; drive roller (sprocket) when the correct material into the discharge tank, do not spray anti branch chain or back to the unloading load branch around the hopper. The manufacturer of bucket elevator thinks that most of the polishing materials do not affect the head shell during unloading; for shallow and deep bucket or bucket, the material will not collide with the front end of hopper during unloading. These requirements should be paid attention to during the trial operation and acceptance of the elevator. ?