洛阳附近有没有服务

 Hoist manufacturer

Hand machine: 13462251112 (wechat)

Email: [email?protected]

Address: Weibin Industrial Park, Xinxiang City

Current location: home page > News and information News and information

How to achieve the preset output of bucket elevator

Source: admin release date: July 17, 2020

? ? ? ? Bucket elevator It has the advantages of large conveying capacity, high lifting height, stable and reliable operation, and long service life. It is very popular with people. But sometimes there are problems. It can not meet the preset production requirements. What should we do? Let's have a look.

Methods to meet the preset production requirements:

1. The material is bonded to the hopper and the retainer. According to the bonding degree, clean the material regularly.

2. Hopper return of bucket elevator, that is to say, all the materials thrown out from the hopper can not enter into the discharge pipe, but return to the frame locally. Reflux is the end cause of the low production of most of the hoists. The way to check the backflow is to stick the hearing on the drum of the elevator. If there is a sound like falling rain in the stethoscope, the degree of backflow can be judged according to the volume, quantity and density of the sound. This method is especially effective for the iron shell elevator.

 The method of bucket elevator to reach the preset output requirement

3. The lifting speed is slow, so the transmission ratio of transmission wheel needs to be changed.
4. The hopper is not fully filled with materials.
5. The capacity of the mechanical facilities at the rear of the hoist is small, and the discharge chute is congested, which increases the production capacity of the rear mechanical facilities.
6. The material is withdrawn from the lifting section, which results in the hoist output not reaching the preset requirements.
7. If the material counting method is not suitable, or the counting method is incorrect, check the child counter, check the material proportion, and revise the calculation method again.
8. The discharging chute is too small or the angle of the chute is not suitable. Correct the discharging chute.
9. The volume of the front mechanical facilities of the bucket elevator is not enough, and the amount of actuated materials is small, so the elevator can not reach the preset experience. It is necessary to find ways to increase the labor capacity of the front mechanical facilities.
Today's small series to bring you is how to achieve the preset production requirements of bucket elevator, I hope it can help you, if you want to know more relevant information, you can pay attention to our website to browse.